Burners

An affordable alternative to expensive brewing systems

Sturdy construction and can easily support the brew kettles and keggels

Dual LP connection and 2 thermometers

105,000 BTU Jet Burner and 60,000 BTU Cast Burner

Brew 10 gallon batches with no problem with the powerful burner

Brutus Stand with Cast Iron Burners

Will handle up to 30 Gallon Kettles

All welded 2 inch squared stainless steel tube frame construction

Stainless steel wind guards

3 hp cast iron burners (colors may vary)

Burner has a 10 psi regulator, a brass control valve and 50 inches of Stainless Steel Braided Hose.

This burner will top out at a whoping 220,000 BTUs.

This burner is made for homebrewing.

They are 14 inch square across the top for a large stock pot (Designed for 1/2 and 1/4 Barrels) They are 11 inch tall.

Anvil Brewing Equipment gets everything right with this new burner! Designed specifically for brewing, this high performance burner can operate at 7 in. and 16 in. heights and has an option for 24 in. leg extensions (sold separately). Fast, efficient, quiet and powerful, this burner includes a rust-free precision cast aluminum manifold, ultra-high temperature coating, and patent-pending integral heat shield to keep your components safe! Flame control is easy with the power control knob on the front of the burner. Supporting kettles up to 20 gallons in size, this has all the features that you will need, in a single awesome burner!

NOTE: This burner was designed to work with propane gas only! The burner comes with a regulator, hose, and adapter to connect to a propane tank. Hit the ground running with no stops at the hardware store!

Anvil High Performance Burner Features:

• Modular legs allow 7, 16, and 24 inch operational heights. Mount to a bench, drain directly into a carboy, or make a 2 tier brew system! 24 inch extensions sold separately.
• Self-leveling feet provide rock-solid stability
• 45,000 BTU/Hr output for fast heating. Boils 5 gal in approximately 20 minutes!
• Large burner surface area distributes heat evenly for efficiency and eliminates hot spots.
• Precision cast aluminum burner will never rust and provides superior flame control.
• Patent pending integral heat shield protects your valve and thermometer from heat damage.
• Deep burner ring is ideal for brewing in windy conditions.
• Ultra-high temperature coating.
• Power control knob and adjustment-free operation makes flame control a breeze.
• Supports kettles up to 20 gal!

A little extra height goes a long way in brewing! Anvil Brewing equipment offers these 24 in. leg extensions for their burner. These will allow you to stand your brew kettle at a height good for gravity feeding into your fermenter! Also a great way to make your kettle part of a gravity-fed 2 or 3-tiered system, these leg extensions are self-leveling and a great way to get that extra height you need!

Blichmann Engineering has developed an incredibly efficient (gas sipper), powerful burner that is head and shoulders above the competition! When others burners wouldn't meet the high standards of Blichmann Engineering, they decided to create their own. Blichmann burners are highly efficient, enabling maximum power and energy usage from the 72,000 BTU output, which outperforms inferior burners with higher BTU outputs. This allows for faster heating, getting worts to that coveted rolling boil quickly, and doing it quiet as a whisper.

The stainless steel design ensure no fuming, as cheap paints are not used in its construction. In addition, its heavy design makes it quite wind-stable, even under less than ideal wind conditions which would hamper brewing operations on lesser burners. Optional leg extensions allow the burner to be mounted high enough for gravity draining into carboys or other fermentors for ease of use. If you prefer to use natural gas, the floor standing burner can easily be converted to use it instead of propane with the optional natural gas conversion kit. Simply put, Blichmann has gotten everything right with this burner, which will be the last one you ever need!

Running out of propane in the middle of a brew day is never a happy event. Brewers find themselves scrambling to get more propane, wasting valuable brewing time, which ends up cutting into time spent enjoying the fruits of their brewing labors. With this kit, you can turn your TopTier stand mounted burner into a natural gas burning thing of beauty!

Blichmann's burners run wonderfully off of natural gas, and although natural gas produces less heat than propane, Blichmann products are engineered to get every last heating unit into your brew kettle. No more worrying about running out of propane in the middle of a brew day, or inconveniently juggling propane tanks. Natural gas makes things that much easier!

Blichmann has thought of everything! Many people get tired of using cumbersome propane tanks that have a limited capacity, and more than one brewers has run out of propane in the middle of a brew day, leading to an expletive-filled mad dash to the hardware store. By running your burner off natural gas, you'll never have to do the propane run again, and will be spend more time drinking your completed product!

The natural gas conversion kit comes with an orifice and a needle valve, which is required for the floor standing model of the Blichmann burner. While natural gas has a lower heat output than propane, the Blichmann burners still perform wonderfully when running off natural gas, and gas can be hard-plumbed for a convenient brew day every time!

This kit that comes with everything you need to install your Blichmann floor standing burner to the TopTier Modular Brewing Stand. Brewers who buy a floor standing burner and later decide to get a TopTier stand can use this kit to quickly and easily mount their burner to the stand. It is all-inclusive, and makes mounting your burner to the stand quick and convenient. No need to buy new stand mounted burner (unless you need more burners, of course!)

This burner is built to last! The Banjo burner is a solid iron burner with a hot flame for maximum boiling ability! Designed for use with larger pots, the Banjo burner features a manifold that spreads the flame and delivers more power than our High Pressure Bayou classic burner. It includes a 0-30 PSI adjustable regulator to control flame and temperature more precisely for applications such as mashing and heating sparge water. Boils are achieved in a fraction of the time as on gas stoves or inferior burners. Make the switch to a Banjo today and experience the difference!

The Bayou Classic burner is an economical way to get off that electric stove and into propane brewing! When doing a full boil, a powerful flame is ideal. The Bayou classic gives you 185,000 BTUs of burning power for your brew day! Compact yet sporting a mounting platform that can accommodate many sizes of brew pots, this burner has been the first burner for many people getting into the hobby. The welded frame is designed for stability, and the windscreen helps ensure consistent burning even on windy days. With a 10 PSI regulator and brass control valve, this is the perfect way to break away from the kitchen and get brewin'!

The TopTier stand mounted burner from Blichmann Engineering gives you all the qualities of the floor standing burner, mounted in your ultimate arrangement on the TopTier Modular Brewing Stand! Boasting a high efficiency output of 72,000 BTUs, this burner has been shown to outperform burners with a higher BTU output. Blichmann has ensured this through its highly efficient design that enables more heat to reach the kettle instead of being lost to the atmosphere. The manifold is multifaceted and flames are kept burning a bright blue, ensuring that kettles are not scorched or discolored.

The stainless steel body prevents rusting and fuming that are often problems associated with cheaper burners. A stable body also ensure optimum performance, even under windy conditions that would be problematic with other burners. Natural gas conversion is a snap with the optional natural gas conversion kit. These bad boys are built to last a lifetime...no need to buy other burners ever again!

Blichmann products are known to be highly modular, and many can be adjusted to fit the individual needs of brewers. The floor standing burner is no exception! Leg extensions for the floor standing burner raise the height of the burner to 24", which is the perfect height for gravity draining into most standard carboys and fermentors. Brew kettles such as Blichmann Boilermakers that are fitted with a ball valve can be used to drain wort into fermentors at the simple twist of the valve. No more unnecessary lifting and siphoning with leg extensions for your floor standing burner!

Note: Burner pictured is sold separately. Also do not exceed a weight greater than 150 lbs. when using the leg extensions.

60,000 BTUs. Low Pressure.

Solid welded frame surrounds the burner making the unit almost indestructible

This model comes completely assembled and is supplied with the appropriate regulator and hose

The Kick A Banjo Outdoor Propane Stove is one of the hottest high pressure propane stoves on the market.

This high pressure propane burner includes a 30 PSI regulator kit.

The large round burner element kicks out the minimum of 210,000 BTUs.

This unit will boil a 120 quart stock pot full of water in no time! It has a 17 inch x 17 inch cooking surface which helps maximize its strong stable design.

Large 14-1/4-by-39-inch cooking surface with 3 burners

13-inch-tall heavy-duty steel frame; triple brass control valves

Extension legs raise height to 25 inches with no screws or bolts

Two side shelves extend length to 60-1/2 inches; 1-year warranty

Comes with 3-foot pressure hose, regulator kit, and instructions