Conical Fermenter Accessories

17 in. (43.2 cm) long

Stainless steel

Works with both 7.9 G & 14 G FastFerments

300 microns

Mesh bottom

A good seal is a terrible thing to lose, especially on a fermenting vessel; it can mean the difference between a flawless craft beer and an infected mess. The Fermenator Lid Seal creates that perfect seal on Blichmann's Fermenators. These replacement seals are available for the 7, 14.5 and 27 or 42 gallon models (the 27 and 42 gallon models use the same size lid seal), and are good to have on hand in case of an accident. Be prepared with an extra Fermenator Lid Seal!

Replacement racking arm assembly for your Blichmann Fermenator. Choose the correct size based on the type of Fermenator you have:

• 7 & 14 gallon NPT models = 3/8 in. racking arm (BE-000132-00)
• All Tri-Clamp models and the 27 & 42 gallon NPT models = 1/2 in. racking arm (BE-000127-00)

A good seal is a terrible thing to lose, especially on a fermenting vessel; it can mean the difference between a flawless craft beer and an infected mess. The Fermenator Lid Seal creates that perfect seal on Blichmann's Fermenators. These replacement seals are available for the 7, 14.5 and 27 or 42 gallon models (the 27 and 42 gallon models use the same size lid seal), and are good to have on hand in case of an accident. Be prepared with an extra Fermenator Lid Seal!

Extra collection ball for your FastFerment.

Replacement racking arm assembly for your Blichmann Fermenator. Choose the correct size based on the type of Fermenator you have:

• 7 & 14 gallon NPT models = 3/8 in. racking arm (BE-000132-00)
• All Tri-Clamp models and the 27 & 42 gallon NPT models = 1/2 in. racking arm (BE-000127-00)

Replacement Racking Arm Fitting for the NPT Blichmann Fermenator. Fittings are sized specifically, so choose the fitting based off your Fermenator size.

Do you like the Fermenator, but wish you had the clearance to gravity drain into kegs? Well, Blichmann had you in mind when they made their Fermenator leg extensions! These leg extensions bolt directly onto the standard legs of the Fermenator and raise the whole assembly an additional 18". With this additional space, you can easily drain into kegs without needing to pressurize the fermenter and push beer out with carbon dioxide. An extra set of legs may very well make your life much easier!

Note: Each set of leg extensions is sized for the specific Fermenator they will be used with (not one size fits all) so make your selection based on your Fermenator size.