Electric Brewing Systems

Designed as Ruby Street's most compact and portable model ever and loaded with professional features, the Fusion 15™ is the newest addition to our lineup of professional brewing systems. We call it the Fusion because it's truly is a culmination of pro design features, conveniences, and fabrication technology that we have drawn from our other designs as well as countless custom builds. 15.5 Gallon Kettles will brew a 10 gallon batch. The small frame (63.5" overall length) allows this system to easily transport in most SUV's. The all new electric option takes you one step further in providing an ultra quiet, very efficient means of heat. Perfect for your home or for a small pilot system. Pictured with the gas control configuration Includes Shipping Designed as Ruby Street's most compact and portable model ever and loaded with professional features, the Fusion 15™ is the newest addition to our lineup of professional brewing systems.  We call it the Fusion because it's truly is a culmination of pro design features, conveniences, and fabrication technology that we have drawn from our other designs as well as countless custom builds.  15.5 Gallon Kettles will brew a 10 gallon batch.  The small frame (63.5" overall length) allows this system to easily transport in most SUV's. The all new electric option takes you one step further in providing an ultra quiet, very efficient means of heat.   System Includes: All welded steel tube frame construction with industrial powder coated finish on frame Burner grates finished in black with a 2000 degree industrial coating (3) 15 Gallon 304 Stainless Steel Kettles w/ Lids 30a PID or BCS Control Panel included Magnetic drive pumps included with stainless steel drip shields and stainless outflow control valves Remote control key fob on / off switches for both pumps included All sanitary tri-clamp fittings on HLT, mash tun, boil kettle, and pumps Silicone hoses with fittings included (7' x 1/2" outflow hose will fill conical's on tall legs) Mash Tun and boil kettle include perforated stainless wall to wall false bottoms and 1/2" stainless steel dip tubes All legs feature non-surface marring plastic feet Includes complete owners manual with operating instructions and warranty information Control Panel Specifications: Stainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black/white tags 30a, 240v electric, single phase (for safety, please use GFCI protection) 30a Twist lock power in supply to plain wire end or 4 prong washer/dryer plug, 6 ft wire Love 16C PID Controllers with manual mode enabled for boil with Love LCT216 Timer 2 L6-30 Flanged outlets for 240v Elements upto 5500w 2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March, plugs included with panel 3 temperature probe inputs via XLR connection 3 RTD temp probe cables, with shielding and black poly sleeving. Color coded heat shrink. 3 RTD 1.5" long temperature probes with Stainless steel 1/2" NPT washer and locknuts for weldless mounting or in plumbing mounting Key style power switch for secure storage Locking mushroom button stops all power to elements and pumps   Fusion 15 System Dimensions: Stand and Kettles: 63.5” wide x 26” deep x 42.5” high(height includes kettles) Control Panel: 16” wide x 18” tall x 8” deep   Optional Sight Glass  If you would like to have a sight glass on your HLT or Boil Kettle please see options.   Optional Thermometer  If you would like to have a thermometer installed on to your Boil Kettle please see options.   Optional Whirlpool Arm w/Valve If you would like a whirlpool arm installed on to your Boil Kettle please see options.   Optional Plate Chiller Package Ruby Street Has a complete plate chiller package that will be installed on your Ruby Street frame.    Plate chiller package includes: Duda Brand 30 Plate all Stainless Chiller mod# B3-36A Bracket to fit any of our frames powder coated to match Mounting hardware Tri-Clover wort connections with 3” dial outflow thermometer  Male and female garden hose fittings on water side of chiller Can be sold and shipped with Ruby Street systems and frames   Optional 50 Foot Immersion Chiller 50 ft. Immersion Chiller is coiled with 3/8" copper tubing and fitted with quality brass garden hose connectors. If you would like to add a 50' Immersion Chiller please see the options section.     Optional HERMS Conversion Kit: HERMS - (heat exchange recirculating mash system)    Many brewers are choosing HERMS as an option to maintain mash temperatures and perform step mashes without direct fired heat.  Our HERMS coil option offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun.   The HERMS Conversion Kit for the Standard Ruby Street Brewery will include: 50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom) Through wall return tri-clover fitting installed at the top of the mash tun with cork float return hose inside (1) additional 3’ hose with tri-clover fittings on both ends (1) additional tri-clover barb added to the end of the normally open 7’ hose (3) additional clamps (3) additional gaskets

Designed as a Nano Brewery / Pilot Brewery, this system features 45 Gallon Kettles and will brew a true 1 bbl (31 gallon) batch. Featuring two stainless pumps and all 1.5" tri-clover connections, this brewery has found it's niche as an economical option for both brew pubs and garage fanatics. Shipping Included Alpha Ruby Street 1 Barrel Brewing System   Offering Free Shipping! Lower 48 States Only   Features:  All welded steel tube frame construction with industrial powder coated finish on frame Burner grates finished in black with a 2000 degree industrial coating (3) 45 Gallon 304 Stainless Steel Kettles w/ Lids 3 piece ball valves included on all kettles and pumps Stainless steel flexible gas lines Propane regulator including 4' stainless braided hose included Magnetic drive pumps included with stainless steel drip shields and stainless outflow control valves Remote control key fob on / off switches for both pumps included All sanitary tri-clamp fittings on HLT, mash tun, boil kettle, and pump Silicone hoses with fittings included (7' x 1/2" outflow hose will fill conicals on tall legs) Mash Tun includes 16 gauge perforated false bottom, and 1/2" stainless steel dip tube Boil kettle includes a domed screen and 1/2" stainless steel dip tube All three kettles include a thermometer installed on to them. All legs feature non-surface marring plastic feet Includes complete owners manual with operating instructions and warranty   Control Panel Specifications: Stainless steel enclosure with weather resistant black and white ID tags. 50a, 240v electric, single phase (for safety, please use GFCI protection) 50a Twist lock power in supply to plain wire end or 4 prong washer/dryer plug, 6 ft wire Love 16C PID Controllers with manual mode enabled for boil with Love LCT216 Timer 4 L6-30 Flanged outlets for 240v Elements upto 5500w 2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March, plugs included with panel 3 temperature probe inputs via XLR connection 3 RTD temp probe cables, with shielding and black poly sleeving. Color coded heat shrink. 3 RTD 1.5" long temperature probes with Stainless steel 1/2" NPT washer and locknuts for weldless mounting or in plumbing mounting Key style power switch for secure storage Locking mushroom button stops all power to elements and pumps Alpha System Dimensions: Stand and Kettles: 83rdquo; wide x 27rdquo; deep x 42rdquo; tall (with kettles) information Control Panel: 24” wide x 22” tall x 8” deep   Optional HERMS Conversion Kit: HERMS - (Heat Exchange Recirculating Mash System)    Many brewers are choosing HERMS as an option to maintain mash temperatures and perform step mashes without direct fired heat.  Our HERMS coil option offers a 1/2" x 50' stainless coil in the hot liquor tank that allows the brewer to recirculate the mash runoff through the coiled heat ex-changer and back into the mash tun. The coil is factory installed only and pressure tested before it ships.   The HERMS Conversion Kit for the Alpha Ruby Street Brewery will include:   50’ ½” SS HERMS coil mounted in the HLT with through wall fittings (tri-clover on top, ball valve and tri-clover at the bottom)  Additional heat shielding welded onto HLT burner grate to protect lower HERMS coil ball valve    The digital control package also works with the HERMS option.   Sight Gauge Option   Now you can get a sight gauge installed on your Boil Kettle or HLT. Please see the options.   Plate Chiller Package   Ruby Street has a complete plate chiller package that will be installed on your Ruby Street frame.    Package includes:   Duda Brand 30 Plate all Stainless Chiller mod# B3-36 Bracket to fit any of our frames powder coated to match Mounting hardware Tri Clover wort connections with 3” dial outflow thermometer Male and female garden hose fittings on water side of chiller Can be sold and shipped with Ruby Street systems and frames.   Optional Whirlpool Arm   If you would like a whirlpool arm assembly added  to your boil kettle please see the options. Includes: 3 piece ball valve w/tri-clamp connection.  

The BrewEasy is a revolutionary and ultra-compact all-grain brewing system that utilizes a patent-pending two kettle recirculation infusion mash process called Kettle-RIMS or K-RIMS for short. This setup gets rid of the hot liquor tank of a traditional three tier system and does away with the time consuming and somewhat complicated sparging process. Ultimately, it gives the all-grain brewer the simplicity of a brew-in-a-bag (BIAB) system, but eliminates the cloudy wort, messy and heavy lifting, all while providing better efficiency! You also get the temperature control and ramping capabilities of a traditional RIMS system. It is simple to setup and easy to use, can fit in your closet which is great for those who live in an apartment or condo, and is a very approachable way to transition from extract to all-grain brewing. Now with the electric version, you can also keep your brew day INSIDE, without having to use propane or natural gas!

See the Additional Info tab for important electric power requirements!

This product comes with all the pieces you need to get the ultimate electric BrewEasy setup, just choose the batch size you would like to brew, and you're all set! Comes with the following:

• Two BoilerMaker brew pots (boil kettle and mash tun) and false bottom. See chart below for brew pot sizes.
• BrewEasy adapter set with plumbing hardware, AutoSparge, and necessary tubing.
• BoilCoil electric heating element (will ship in its own box, but necessary holes will be pre-drilled in the bottom brew pot).
• Electric Tower of Power temperature controller.
• Tower of Power LTE Stand with March 815 pump.

BoilerMaker Brew Pots
This BrewEasy all-in system comes with two BoilerMaker brew pots. The upper pot is the mash tun and the lower pot is the boil kettle. Based on your chosen batch sizes, here are the pot sizes that come with the kit:

So, How Does it all Work?
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower pot (boil kettle) and the remainder in the upper pot (mash tun). Set your AutoSparge, turn on the pump, and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. Recirculation flow rate is controlled by included orifices, allowing for 6 flow settings from 0.5 - 2.0 gpm. When you're at your desired temperature, turn off the pump and add your malt. Maintaining your mash temp or even ramping through several temperature rests is a breeze with the Tower of Power LTE system that is included. Just set your temp and sit back. When you're through with your mash, simply turn off the pump and let all the wort from your mash tun drain into your brew kettle and boil as normal. It's as simple as that!

Already Own Some Blichmann Equipment? Then check out the BrewEasy Adapter Lid Kit. The kit is designed to upgrade your setup to the BrewEasy system if you already own a BoilCoil, brew pump, and the appropriately sized BoilerMaker brew pots.

Can I brew smaller batches on a BrewEasy system designed for larger batches?
Yes, you can definitely do this, but there are some caveats to note and special steps will need to be taken. The challenge is two-fold: an overly thin mash bed (which can lead to cloudy wort), mixed with a lower volume in the boil kettle (which can lead to carmelization). In general, the suggestion is to purchase the system that fits the batch size you plan to brew the most. See suggestions below:

Less than 5 gal. in 5 gal. BrewEasy
It is not recommended to brew smaller than a 4 gal. finished batch size in the 5 gal. BrewEasy.

5 gal. batch in 10 gal. BrewEasy
A minimum of 10 lbs. of grain. You'll also need the 9 in. AutoSparge float rod (SKU BE-000259-00), to accommodate the smaller mash. Maintain a minimum volume of 5 gallons in the bottom kettle at all times.

10 gal. batch in 20 gal. BrewEasy
A minimum of 20 lbs. of grain. You'll also need the 12 in. AutoSparge float rod (SKU BE-000260-00) to accommodate the smaller mash. Maintain a minimum volume of 7 gallons in the bottom kettle at all times.

The 240V Blichmann Engineering products all use a standard L6-30 plug for their connections, but not everyone has that type of hookup in their house. So, Blichmann came out with these power adapters to allow you to hook up their 240V electric products to your existing power receptacles. If you don't know which type of receptacle you have, take a look at the drawings provided to figure out which adapter you will need.

NOTE: These adapters are for the 240V L6-30 products only, and will NOT work with the 120V products!

The BrewEasy is a revolutionary and ultra-compact all-grain brewing system that utilizes a patent-pending two kettle recirculation infusion mash process called Kettle-RIMS or K-RIMS for short. This setup gets rid of the hot liquor tank of a traditional three tier system and does away with the time consuming and somewhat complicated sparging process. Ultimately, it gives the all-grain brewer the simplicity of a brew-in-a-bag (BIAB) system, but eliminates the cloudy wort, messy and heavy lifting, all while providing better efficiency! You also get the temperature control and ramping capabilities of a traditional RIMS system. It is simple to setup and easy to use, can fit in your closet which is great for those who live in an apartment or condo, and is a very approachable way to transition from extract to all-grain brewing. Now with the electric version, you can also keep your brew day INSIDE, without having to use propane or natural gas!

See the Additional Info tab for important electric power requirements!

This product comes with all the pieces you need to get the ultimate electric BrewEasy setup, just choose the batch size you would like to brew, and you're all set! Comes with the following:

• Two BoilerMaker brew pots (boil kettle and mash tun) and false bottom. See chart below for brew pot sizes.
• BrewEasy adapter set with plumbing hardware, AutoSparge, and necessary tubing.
• BoilCoil electric heating element (will ship in its own box, but necessary holes will be pre-drilled in the bottom brew pot).
• Electric Tower of Power temperature controller.
• Tower of Power LTE Stand with March 815 pump.

BoilerMaker Brew Pots
This BrewEasy all-in system comes with two BoilerMaker brew pots. The upper pot is the mash tun and the lower pot is the boil kettle. Based on your chosen batch sizes, here are the pot sizes that come with the kit:

So, How Does it all Work?
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower pot (boil kettle) and the remainder in the upper pot (mash tun). Set your AutoSparge, turn on the pump, and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. Recirculation flow rate is controlled by included orifices, allowing for 6 flow settings from 0.5 - 2.0 gpm. When you're at your desired temperature, turn off the pump and add your malt. Maintaining your mash temp or even ramping through several temperature rests is a breeze with the Tower of Power LTE system that is included. Just set your temp and sit back. When you're through with your mash, simply turn off the pump and let all the wort from your mash tun drain into your brew kettle and boil as normal. It's as simple as that!

Already Own Some Blichmann Equipment? Then check out the BrewEasy Adapter Lid Kit. The kit is designed to upgrade your setup to the BrewEasy system if you already own a BoilCoil, brew pump, and the appropriately sized BoilerMaker brew pots.

Can I brew smaller batches on a BrewEasy system designed for larger batches?
Yes, you can definitely do this, but there are some caveats to note and special steps will need to be taken. The challenge is two-fold: an overly thin mash bed (which can lead to cloudy wort), mixed with a lower volume in the boil kettle (which can lead to carmelization). In general, the suggestion is to purchase the system that fits the batch size you plan to brew the most. See suggestions below:

Less than 5 gal. in 5 gal. BrewEasy
It is not recommended to brew smaller than a 4 gal. finished batch size in the 5 gal. BrewEasy.

5 gal. batch in 10 gal. BrewEasy
A minimum of 10 lbs. of grain. You'll also need the 9 in. AutoSparge float rod (SKU BE-000259-00), to accommodate the smaller mash. Maintain a minimum volume of 5 gallons in the bottom kettle at all times.

10 gal. batch in 20 gal. BrewEasy
A minimum of 20 lbs. of grain. You'll also need the 12 in. AutoSparge float rod (SKU BE-000260-00) to accommodate the smaller mash. Maintain a minimum volume of 7 gallons in the bottom kettle at all times.

The 240V Blichmann Engineering products all use a standard L6-30 plug for their connections, but not everyone has that type of hookup in their house. So, Blichmann came out with these power adapters to allow you to hook up their 240V electric products to your existing power receptacles. If you don't know which type of receptacle you have, take a look at the drawings provided to figure out which adapter you will need.

NOTE: These adapters are for the 240V L6-30 products only, and will NOT work with the 120V products!

The 240V Blichmann Engineering products all use a standard L6-30 plug for their connections, but not everyone has that type of hookup in their house. So, Blichmann came out with these power adapters to allow you to hook up their 240V electric products to your existing power receptacles. If you don't know which type of receptacle you have, take a look at the drawings provided to figure out which adapter you will need.

NOTE: These adapters are for the 240V L6-30 products only, and will NOT work with the 120V products!

The BrewEasy is a revolutionary and ultra-compact all-grain brewing system that utilizes a patent-pending two kettle recirculation infusion mash process called Kettle-RIMS or K-RIMS for short. This setup gets rid of the hot liquor tank of a traditional three tier system and does away with the time consuming and somewhat complicated sparging process. Ultimately, it gives the all-grain brewer the simplicity of a brew-in-a-bag (BIAB) system, but eliminates the cloudy wort, messy and heavy lifting, all while providing better efficiency! You also get the temperature control and ramping capabilities of a traditional RIMS system. It is simple to setup and easy to use, can fit in your closet which is great for those who live in an apartment or condo, and is a very approachable way to transition from extract to all-grain brewing. Now with the electric version, you can also keep your brew day INSIDE, without having to use propane or natural gas!

See the Additional Info tab for important electric power requirements!

This product comes with all the pieces you need to get the ultimate electric BrewEasy setup, just choose the batch size you would like to brew, and you're all set! Comes with the following:

• Two BoilerMaker brew pots (boil kettle and mash tun) and false bottom. See chart below for brew pot sizes.
• BrewEasy adapter set with plumbing hardware, AutoSparge, and necessary tubing.
• BoilCoil electric heating element (will ship in its own box, but necessary holes will be pre-drilled in the bottom brew pot).
• Electric Tower of Power temperature controller.
• Tower of Power LTE Stand with March 815 pump.

BoilerMaker Brew Pots
This BrewEasy all-in system comes with two BoilerMaker brew pots. The upper pot is the mash tun and the lower pot is the boil kettle. Based on your chosen batch sizes, here are the pot sizes that come with the kit:

So, How Does it all Work?
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower pot (boil kettle) and the remainder in the upper pot (mash tun). Set your AutoSparge, turn on the pump, and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. Recirculation flow rate is controlled by included orifices, allowing for 6 flow settings from 0.5 - 2.0 gpm. When you're at your desired temperature, turn off the pump and add your malt. Maintaining your mash temp or even ramping through several temperature rests is a breeze with the Tower of Power LTE system that is included. Just set your temp and sit back. When you're through with your mash, simply turn off the pump and let all the wort from your mash tun drain into your brew kettle and boil as normal. It's as simple as that!

Already Own Some Blichmann Equipment? Then check out the BrewEasy Adapter Lid Kit. The kit is designed to upgrade your setup to the BrewEasy system if you already own a BoilCoil, brew pump, and the appropriately sized BoilerMaker brew pots.

Can I brew smaller batches on a BrewEasy system designed for larger batches?
Yes, you can definitely do this, but there are some caveats to note and special steps will need to be taken. The challenge is two-fold: an overly thin mash bed (which can lead to cloudy wort), mixed with a lower volume in the boil kettle (which can lead to carmelization). In general, the suggestion is to purchase the system that fits the batch size you plan to brew the most. See suggestions below:

Less than 5 gal. in 5 gal. BrewEasy
It is not recommended to brew smaller than a 4 gal. finished batch size in the 5 gal. BrewEasy.

5 gal. batch in 10 gal. BrewEasy
A minimum of 10 lbs. of grain. You'll also need the 9 in. AutoSparge float rod (SKU BE-000259-00), to accommodate the smaller mash. Maintain a minimum volume of 5 gallons in the bottom kettle at all times.

10 gal. batch in 20 gal. BrewEasy
A minimum of 20 lbs. of grain. You'll also need the 12 in. AutoSparge float rod (SKU BE-000260-00) to accommodate the smaller mash. Maintain a minimum volume of 7 gallons in the bottom kettle at all times.

The BrewEasy is a revolutionary and ultra-compact all-grain brewing system that utilizes a patent-pending two kettle recirculation infusion mash process called Kettle-RIMS or K-RIMS for short. This setup gets rid of the hot liquor tank of a traditional three tier system and does away with the time consuming and somewhat complicated sparging process. Ultimately, it gives the all-grain brewer the simplicity of a brew-in-a-bag (BIAB) system, but eliminates the cloudy wort, messy and heavy lifting, all while providing better efficiency! You also get the temperature control and ramping capabilities of a traditional RIMS system. It is simple to setup and easy to use, can fit in your closet which is great for those who live in an apartment or condo, and is a very approachable way to transition from extract to all-grain brewing. Now with the electric version, you can also keep your brew day INSIDE, without having to use propane or natural gas!

See the Additional Info tab for important electric power requirements!

This product comes with all the pieces you need to get the ultimate electric BrewEasy setup, just choose the batch size you would like to brew, and you're all set! Comes with the following:

• Two BoilerMaker brew pots (boil kettle and mash tun) and false bottom. See chart below for brew pot sizes.
• BrewEasy adapter set with plumbing hardware, AutoSparge, and necessary tubing.
• BoilCoil electric heating element (will ship in its own box, but necessary holes will be pre-drilled in the bottom brew pot).
• Electric Tower of Power temperature controller.
• Tower of Power LTE Stand with March 815 pump.

BoilerMaker Brew Pots
This BrewEasy all-in system comes with two BoilerMaker brew pots. The upper pot is the mash tun and the lower pot is the boil kettle. Based on your chosen batch sizes, here are the pot sizes that come with the kit:

So, How Does it all Work?
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower pot (boil kettle) and the remainder in the upper pot (mash tun). Set your AutoSparge, turn on the pump, and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. Recirculation flow rate is controlled by included orifices, allowing for 6 flow settings from 0.5 - 2.0 gpm. When you're at your desired temperature, turn off the pump and add your malt. Maintaining your mash temp or even ramping through several temperature rests is a breeze with the Tower of Power LTE system that is included. Just set your temp and sit back. When you're through with your mash, simply turn off the pump and let all the wort from your mash tun drain into your brew kettle and boil as normal. It's as simple as that!

Already Own Some Blichmann Equipment? Then check out the BrewEasy Adapter Lid Kit. The kit is designed to upgrade your setup to the BrewEasy system if you already own a BoilCoil, brew pump, and the appropriately sized BoilerMaker brew pots.

Can I brew smaller batches on a BrewEasy system designed for larger batches?
Yes, you can definitely do this, but there are some caveats to note and special steps will need to be taken. The challenge is two-fold: an overly thin mash bed (which can lead to cloudy wort), mixed with a lower volume in the boil kettle (which can lead to carmelization). In general, the suggestion is to purchase the system that fits the batch size you plan to brew the most. See suggestions below:

Less than 5 gal. in 5 gal. BrewEasy
It is not recommended to brew smaller than a 4 gal. finished batch size in the 5 gal. BrewEasy.

5 gal. batch in 10 gal. BrewEasy
A minimum of 10 lbs. of grain. You'll also need the 9 in. AutoSparge float rod (SKU BE-000259-00), to accommodate the smaller mash. Maintain a minimum volume of 5 gallons in the bottom kettle at all times.

10 gal. batch in 20 gal. BrewEasy
A minimum of 20 lbs. of grain. You'll also need the 12 in. AutoSparge float rod (SKU BE-000260-00) to accommodate the smaller mash. Maintain a minimum volume of 7 gallons in the bottom kettle at all times.

The 240V Blichmann Engineering products all use a standard L6-30 plug for their connections, but not everyone has that type of hookup in their house. So, Blichmann came out with these power adapters to allow you to hook up their 240V electric products to your existing power receptacles. If you don't know which type of receptacle you have, take a look at the drawings provided to figure out which adapter you will need.

NOTE: These adapters are for the 240V L6-30 products only, and will NOT work with the 120V products!

The Tower LTE Stand is a great option for those who want the functionality of the Tower of Power stand, but are tight on space. When collapsed, the stand fits neatly into your BoilerMaker brew pot, so it's easy to store. It might look cute, but this bad boy sure is tough and will make your brew day that much easier. It will also make a great addition to those wanting to upgrade to the BrewEasy system that already have BoilerMaker brew pots! It comes in two different options: with or without a March 815 pump. If you already own a brew pump, it comes with the necessary hardware to mount it to the stand.

Stand Includes:
Stand
GFCI Outlet box with two receptacles
Control Module Mounting plate
Two Piece ball valve
Temperature Sensor Fitting
All necessary hardware

NOTE: Tower of Power Control Module, Therminator, and Therminator mounting hardware sold separately.

The 240V Blichmann Engineering products all use a standard L6-30 plug for their connections, but not everyone has that type of hookup in their house. So, Blichmann came out with these power adapters to allow you to hook up their 240V electric products to your existing power receptacles. If you don't know which type of receptacle you have, take a look at the drawings provided to figure out which adapter you will need.

NOTE: These adapters are for the 240V L6-30 products only, and will NOT work with the 120V products!

The Tower LTE Stand is a great option for those who want the functionality of the Tower of Power stand, but are tight on space. When collapsed, the stand fits neatly into your BoilerMaker brew pot, so it's easy to store. It might look cute, but this bad boy sure is tough and will make your brew day that much easier. It will also make a great addition to those wanting to upgrade to the BrewEasy system that already have BoilerMaker brew pots! It comes in two different options: with or without a March 815 pump. If you already own a brew pump, it comes with the necessary hardware to mount it to the stand.

Stand Includes:
Stand
GFCI Outlet box with two receptacles
Control Module Mounting plate
Two Piece ball valve
Temperature Sensor Fitting
All necessary hardware

NOTE: Tower of Power Control Module, Therminator, and Therminator mounting hardware sold separately.