High Pressure Hose - Regulator Connection Hose
For use to connect any secondary regulator to the CO2 cylinder.
Notes and Warnings:
There are many situations where people prefer to connect the high pressure hose directly. Whether it be to get the CO2 tank out of the fridge, or just not wanting a regulator attached to the tank.
Please keep in mind that this connection is for CO2 ONLY, DO NOT TRY TO USE THIS HOSE WITH A NITROGEN TANK!
Both of the secondary regulators that we offer (Chudnow and Taprite) have pressure relief valves built into them. SOME SECONDARY REGULATOR BRANDS DO NOT HAVE PRESSURE RELIEF VALVES! Connecting a high pressure hose to a secondary regulator that does not have a pressure relief valve could be very dangerous.
When working with a high pressure hose, never use a barb fitting with a clamp. Always connect the hose to the regulator with an MFL threaded fitting.
The suggested method of connecting a secondary regulaotor to a CO2 system is through a primary regulator attached to a bank of secondaries rather than using a high pressure hose. Using a primary regulator attached to a bank of secondary regulators is the safest and easiest way to accomplish this and it costs about the same.
For a setup to use with left hand threaded regulators (Taprite) use RG511L
For a setup to use with right hand threaded regulators (Chudnow) use RG511R
Select which one you need from the options Below:

• Taprite - $41.95
• Chudnow - $41.95