Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump.,,*Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.,,Homebrewing Tips:,1. Great for Whirlpooling 20 gallons of wort or more.,2. Ideal for our Counterflow Chillers WC90.,,Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup.,,Statistics,Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head,Max Head: 27 ft. at 1 GPM,Inlet: 1" FPT,Outlet: 1/2" MPT,,,Materials in Contact with Beer,Polysulfone,Stainless Steel,Buna N,Ceramic