Keg Dispensing Supplies

Do you have a home draft system and use both a sanke coupler and ball or pin lock kegs? Instead of going through the routine of disconnecting your sanke coupler and reattaching ball or pin lock connections every time, make your life easier with a few of these tailpieces! They have a 1/4" MFL connnection and can be used in conjunction with a hex beer nut and a neoprene washer on both the gas and liquid side of your sanke coupler. Simply replace your existing tailpieces with these, and hook up the respective swivel nuts to your gas and liquid lines.Whenever you want to use sanke or ball/pin lock connections, you can easily attach the swivel nuts to either setup!

Please Note that we recommend using a flare fitting washer on the sanke side to completely seal the metal-on-metal connections (most modern ball and pin lock disconnects have plastic on the end of their connection, so a flare fitting washer is uneccessary unless you have an older style disconnect.) Make life easier for yourself and serve beer through any type of connection!

A bonnet angler is a little piece that comes in handy when trying to use an extra-long tap handle on a kegerator that has a flat surface, such as a converted refridgerator. Often, a longer tap handle won't have the clearance necessary, and will hit the body of the kegerator, not able to fully shut the beer faucet. Alleviate these problems with a bonnet angler! The bonnet angler creates a slight forward lean, giving you room to proudly display your long tap handles!

This is a replacement chrome collar for standard faucets. It fits on top of the bonnet and threads over the faucet lever. An excellent replacement for missing or damaged collars on standard faucets!

Individual 16 gram Co2 non-threaded bulb for use with our Cornelius Keg CO2 Charger (Item # 4990)

3/16" is the standard inner diameter for most serving systems. This 3/16" tubing is thin walled and very economical. We use it in making our dispensing line assemblies. It is durable and works well in most dispensing applications.

Inner Diameter: 3/16 in.
Outer Diameter: 5/16 in.

A great, easy way to make CO2 and keg connections!The pin lock gas dispensing kit is a 3-foot length of 5/16" ID Bevlex tubing with a ball lock gas disconnect and 5/16" swivel nut set worm-clamped on one end, and a small worm clamp on the other that can be used to connect the assembly to a CO2 manifold or regulator. Always good to have around, especially for carbonating several kegs at once!

This CO2 shutoff with barb and check valve is ideal for use with CO2 regulators and manifolds! It has 1/4" MPT right-hand threading on one side that threads into most standard regulators and manifolds. On the other end is a standard 3/8" barb, which works perfectly with standard CO2 gas line. Get one of these to replace a damaged or missing shutoff, put on a wye splittler, or create your own CO2 apparatus!

One of the most indispensible washers in modern history! Without this washer, there would be leaky kegs on college campuses and at house parties across the country. This is the washer that fits on the bottom of a standard American "D" style coupler. These washers have a tendency to come off during removal after a keg blows. In case this happens to you, be sure to get an extra washer and keep the beer flowing!

Keep that check valve ball from escaping with a check valve ball retainers! This little winged piece of plastic fits in the shaft of your standard sanke coupler, holding the check valve ball in place so that backflow does not become an issue. Protect the investment of your beer and dispensing equipment by having one of these on hand should the unthinkable loss of the original retainer occur!

Have some extra tubing on hand for all your kegging needs! 5/16" inner diameter tubing is the standard tubing used in kegging and carbonation systems in the U.S. The Bevlex tubing we carry is thick-walled for extra protection and security when carbonating. This can be used on all standard CO2 connections in your draft system.

Inner Diameter: 5/16 in.
Outer Diameter: 9/16 in.

The secret weapon for keeping a clean brewery! A double ended brush can come in handy for cleaning all those hard-to-reach places, not only in your dispensing system, but also in your brewing equipment. The two ends have two different sizes brushes, which come in handy in cleaning faucet parts, keg posts, dip tubes, racking arms, ball valves, bottle fillers...the list goes on! Keep every nook and cranny of your brewing equipment clean with one of these. Highly recommended to anyone who owns a keg or a permanent dispensing setup.

Oetiker clamps provide a permanent clamping solution! This style of clamp has a 1-ear design, which means they are crimped at a single point on the clamp to create a superior seal over your tubing. These small Oetiker clamps are often used on 3/16" thin-walled tubing that is used in some liquid applications and on thin-walled liquid draft lines. These clamps hold tight, creating a great seal that holds for a long time! Some people prefer these for more permanent systems. If you are looking to switch over to a snug seal that lasts, make sure you use Oetiker clamps!

This CO2 shutoff with 1/4" MPT threading and check valve is ideal for use with CO2 regulators and manifolds! It has 1/4" MPT right-hand threading on one side that threads into most standard regulators and manifolds. On the other end is standard 1/4" MFL threading, which works perfectly with standard swivel nut sets and other 1/4" MFL fittings. If using a swivel nut set, we recommend using a plastic flare fitting as well, in order to create a good seal. Get one of these to replace a damaged or missing shutoff, put on a wye splittler, or create your own CO2 apparatus!

These quick connects come in handy for quickly connecting to and disconnecting from connections of all kinds! This is the female side that has a gray disconnect button for quickly disconnecting from the male end. It has a 1/4" straight barb to hook up to 1/4" ID tubing. It has a temperature tolerance range from -40 to 180F and a vacuum pressure tolerance of 120 PSI. This female piece is used with the 1/4" Quick Connect Insert, item #05P01-122.

Beer shanks to make all your dispensing dreams come true! These chrome plated brass shanks are used in a variety of setups to create draft systems. A 3/16" bore is perfect for liquid dispensing of all types, including sweet sweet beer. This 5" shank (actual measurement: 5 1/8") is slightly longer than the standard 4" shank and works when you need just a little more length. Simply drill out your hole, place your shank through, and lock in place with the included lock nut. A faucet can then be attached to the outside of your draft setup, whether it be a kegerator, keezer or jockey box! Also needed on the inside is a 3/16" tailpiece, neoprene beer washer and beer nut.

Gas lost in your CO2 system can lead to a shorter life span of your CO2 cylinders. Prevent CO2 loss with a washer! A plastic CO2 washer fits between your CO2 cylinder and regulator and helps to create a good seal. A good seal ensures that you don't lose gas when carbonating or serving. These plastic CO2 washers fit Taprite brand regulators, as well as many standard-sized CO2 regulators. Keep a few on hand in case of an emergency!

A black plastic picnic faucet comes in handy in a pinch! Affectionately referred to as a cobra tap, this is a fairly simple dispensing mechanism. When the lever is pressed, the rubber gate is lifted, allowing beer to flow. These picnic faucets come apart easily for cleaning, and feature a barbed end that can fit on standard beer line. Make your own or keep one on hand in case the unthinkable happens!

Ever noticed how your homebrew attracts those pesky fruit flies (or drosophila melanogaster in the science world)? Seems they show up a lot easier and quicker than they leave, and are a real pain to kill. Introducing the Fruit Fly Bar Pro, Fly Strip. This ingenious product has a controlled release technology to slowly diffuse a deep penetrating vapor in enclosed spaces for up to 4 months. Vapor is clean and odorless, and evenly distributed throughout the enclosed treatment area. Kills visible and invisible (yes, even ones with invisibility cloaks on) insects on contact, and prevents new insect infestations. Works in enclosed spaces of up to 200 cubic feet. A must have for an active homebrew draft system area. Want proof? Then check out this video below

This is a replacement brass faucet lever for standard faucets. It is the brass piece that the faucet knob or handle screws onto, and fits into the plunger assembly. It moves forward and backward, working in tandem with the plunger assembly to allow beer to flow. These brass levers are known to break every once in awhile, so if you need a replacement, we have one for you right here!

This stainless steel tee is perfect for gas application, but can be used wherever a tee with hose barb fittings is required. It has three 3/8" barb connections, one on all ends, and is therefore able to split gas off in two separate directions from the source.

A swivel nut set with a barb for your liquid side connections! These swivel nut sets come with a standard 1/4" female flared nut and a 1/4" barb. This swivel nut set is perfect for use with standard 3/16" ID liquid tubing, thin or thick-walled. These can be connected directly to the standard liquid disconnects that we offer, or used with a plastic flare fitting for any direct metal-on-metal connections.