Transfer Pumps

This is the older brother of the Chugger Pump family and comes with all the basic specs as its siblings, but has the added benefit of a larger 3/4" center inlet stainless steel head. Bigger in this case is definitely better. Bigger inlet = easier priming = less chance to run it dry. Comes stock with a 1/20 horsepower motor, can handle liquid up to 250F (120C), and all the materials are FDA Food Compliant. Did we mention yet that the head is made of stainless steel? Yeah, that's pretty cool.

For an ideal setup, add a ball valve to the outlet port so you can throttle down your flow rate which will allow more efficient sparging and cooling.

• Max Flow of 7 gpm (26.5 lpm)
• 3/4" male NPT inlet and 1/2" male NPT outlet
• 2' x 7/8" impeller
• 4 ft. 115V power chord
• Stainless Steel head
• Handles liquids up to 250F (120C)
• Comes with mounting plate to help integrate into your existing system
• Pump is NOT self-priming. Don't run dry

This is the replacement head for the center inlet stainless steel Chugger Pump. Included is the pump head, head fitting, impeller blade, gasket and placement strews. Breathe new life into your old Chugger Pump today!

This is the replacement head for the inline stainless steel Chugger Pump. Included is the pump head, head fitting, impeller blade, gasket and placement screws. Breathe new life into your old Chugger Pump today!

Tired or relying on gravity to transfer your hot wort on brew day? Then it's time for a brew pump. This inline model from Chugger Pumps has all the same guts as its stainless steel sibling, but with a polysulfone (plastic) head. Stock with a 1/20 horsepower motor, can handle liquid up to 250F (120C), and all the materials are FDA Food Compliant. If this is your first pump and you're looking for an economical price, this one is hard to beat.

For an ideal setup, add a ball valve to the outlet port so you can throttle down your flow rate which will allow more efficient sparging and cooling.

• Max Flow of 7 gpm (26.5 lpm)
• 1/2" male NPT inlet and outlet
• 2' x 7/8" impeller
• 4 ft. 115V power chord
• Polysulfone head
• Handles liquids up to 250F (120C)
• Comes with mounting plate to help integrate into your existing system
• Pump head can be rotated 360° in 90° intervals
• Pump is NOT self-priming. Don't run dry

Water transfer pump for hot liquor tank or recirculating chillers

High temperature up to 212'F

FDA approved food grade

Mini and energy saving

Brushless and quiet